★★★★★ Alexis D. Vyne - Weekly Website Updates - Videos - Pics & More! ★★★★★

[AlexisDVyne]

Well I had a fun Easter weekend!

I've been geeking out lately trying to automate my fucking machine to use with a Chaturbate ap..

On Sunday I did a fun cam show that was mainly about anal gaping..

Everyone seemed to enjoy going down the bunny hole!

[AlexisDVyne]

So I haven't had much luck automating my fucking machine yet.. Tomorrow I'm going to try and use PyUSB to see if I can start & stop the machine.. If that works I'll be able to control the machine from the command line with a Python script..

In the mean time I've been adding to my collection of cumshot clips..

[Ted54]

Well I had a fun Easter weekend!

I've been geeking out lately trying to automate my fucking machine to use with a Chaturbate ap..

On Sunday I did a fun cam show that was mainly about anal gaping..

Everyone seemed to enjoy going down the bunny hole!

I would love for you to gape my butt hole with your big cock

[thickmotherfucker]

So I haven't had much luck automating my fucking machine yet.. Tomorrow I'm going to try and use PyUSB to see if I can start & stop the machine.. If that works I'll be able to control the machine from the command line with a Python script..

In the mean time I've been adding to my collection of cumshot clips..

I'll help you automate it babe, 100 rpm activated only with my cock print

[AlexisDVyne]

Haha..

I'm not having much luck.. Python 2.7 Ubuntu 16.04 & pyusb with libusb..

I can see the device.. But I can't figure out how to send commands to it properly..

This is the code on the microchip..

DoUSBIn:    'Check and receive data from the USB bus                           
    tmr0ie = 0                                     
    USBBufferCount = USBBufferSizeRX               
    USBService                                      
    USBIn 1, USBBufferin, USBBufferCount, Timeout  
Timeout:
@   Reload_TMR0           
    tmr0ie = 1              ' re-enable TMR0 int
    if USBBUFFERIN[0]  = 69 then
      isUSB    = 1
      adc_0    = USBBUFFERIN[1]   'Depth
      adc_1    = USBBUFFERIN[2]   'Stroke length
      adc_2    = USBBUFFERIN[3]   'Speed
      adc_3    = USBBUFFERIN[4]   'Time
      USBctrl  = USBBUFFERIN[5]   'Command (1:stop 2:run 3:prev 4:next)
      ParamID  = USBBufferIn[6]   'ID of Parameter
      ParamVal = USBBufferIn[7]   'Value of Parameter
    else                    
      USBctrl = 0
      isUSB = 0
    endif
    return

What I need to do is figure out how to use pyUSB to send commands to USBctrl (USBBufferIn[6]) the commands to stop & run (1/2). Unfortunately I don't have a lot of experience with USB protocol or with python.. The machine has software for win7x but win10 doesn't recognize it.. Also I need to be able to start & stop the machine from the command line to implement a scripted operation..

Ideally I'd like to control USBBufferIn 1 to 5 and have full control of the remote functions.. I have a ubuntu 16.04 server to dedicate to it..

[thickmotherfucker]

how far have you gotten? are you able to read any info from the device?

not an expert in pyUSB, but I can help with Python perhaps (if I can get over your python staring in my face that is ). DM me if interested, maybe we can figure it out together.

[AlexisDVyne]

how far have you gotten? are you able to read any info from the device?

not an expert in pyUSB, but I can help with Python perhaps (if I can get over your python staring in my face that is ). DM me if interested, maybe we can figure it out together.

Thanks.. I sent you a message..

Yes I can see the device with dmesg & lsusb gives me a report on the device.. I can also read from the device..

It looks like it uses interrupt transfer for the controls.. I'm not really sure though..

[AlexisDVyne]

YAY! I've managed to fully automate the Fucking Machine with Chaturbate now! It was a challenge but now I have a full fledged chrome plugin for it! My tip jar plus goals program let the users control the machine with their tops & I've got it fully debugged now! I think so anyway.. lol..

On a different note Mr Hankey's Toys decided to send me a promotional gift! I think someone there wants to watch me get totally violated!
This is the Seahorse XXXL..

[AlexisDVyne]

Well I finished another Chaturbate app for my fucking machine! The DVyne Fuk-IT Menu is now at version 1.0 and it works really good!

The app allows users to choose an item from the menu and then the machine runs that item! If you choose another item while the machine is running it gets added to the queue and will be run in the order it was received! You can queue as many items as you want too!

There are 6 patterns and 4 speeds to choose from for a total of 24 items! Users can mix and match the ones they like & everyone can get a turn because of the queue! The menu is quite reasonably priced and every show ends with a cumshot!

Typically there's 2 shows a day at Noonish & 8pm pacific time..

Click this link to go to my Chaturbate room!

I think this is the best "Fucking" idea I ever had!

[AlexisDVyne]

So I've been getting my brains fucked out by everyone using the machine!

I've updated my menu app for Chaturbate so now there are 5 speeds and 5 patterns to choose from!

I've run into a couple issues with the limitations of toy size on CB tho which sucks.. I have a few toys I'd like to use but can't because of the 12 inch limit..

So I have to keep things at 12 inches or less and no thicker than a pop can! It's so hard to find toys that math those dimensions!

The cyclops and the thunderstick both meet the requirements tho!