View Full Version : How large is this cock???
In inches... how large do you think
this entire shaft is??? Curious...
Having a debate w/ a friend of mine.
the_corner
04-20-2008, 09:24 PM
Didn't you post a ruler shot?
http://www.hungangels.com/board/viewtopic.php?t=31644&start=120
62des
04-21-2008, 02:30 AM
I'd say maybe 8 because she's so small it makes her penis appear bigger. This is said prior to clicking the ruler pic link. After seeing the pic she's clearly adding a half inch by pushing it from the side.
Here's another ruler shot.
And another couple of pics.
What's your best estimate of her overall cock size???
BeardedOne
04-21-2008, 08:48 AM
I think you'll have to posts a few dozen more pix before we can get a reasonably close estimate. :wink:
deep.lurkr
04-21-2008, 09:07 AM
Somewhere between delicious and yes please.
Aunt Kay
04-21-2008, 01:02 PM
If you were into deep throat, it would reach half way down to your stomach.
bigjim7
04-21-2008, 07:10 PM
She is no more than 7 inches that ruler shot is taken from the side where as a true measurement should be along the top. She is probably 7" non bone pressed and maybe 7.5" tops bone pressed.
Yoda Rules!
04-21-2008, 11:53 PM
I'd have to say large. No, make that very large.
El Nino
04-22-2008, 01:01 AM
almost 9"
IsuckTgirlCock
04-24-2008, 08:59 PM
Ive sucked bigger, its about 8 or 8.5 id guess, but nice chick , her face is hott, thats one you can make out with hehehe
Nikka
04-24-2008, 09:19 PM
OMG
bassman2546
04-25-2008, 01:07 AM
I say 8 inches. The ruler shot shows, if you look closely, about a half inch jabbed into her side. Include that and she goes from 8 1/2 down to only 8 inches - ONLY 8 INCHES for someone 5 feet tall. Sheeesh!
uber_nerd
07-08-2008, 07:25 AM
I agree, the ruler, given the 3/8" she has pressed into her stomach, reads 8"
....but you must take into account the 17" radius of curvature of the penis in order to calculate its true, arc length.
The chord angle would be:
angle = 2*asin(opposite/hypotenuse)
angle = 2*asin((8/2)/17)
angle = 2*asin(0.235294)
angle = 27.21792 degrees or 0.4750422 radians
arc length = radius * angle
arc length = 17 * 0.4750422
arc length = penis length = 8.0757174
aparne
07-08-2008, 10:38 AM
I agree, the ruler, given the 3/8" she has pressed into her stomach, reads 8"
....but you must take into account the 17" radius of curvature of the penis in order to calculate its true, arc length.
The chord angle would be:
angle = 2*asin(opposite/hypotenuse)
angle = 2*asin((8/2)/17)
angle = 2*asin(0.235294)
angle = 27.21792 degrees or 0.4750422 radians
arc length = radius * angle
arc length = 17 * 0.4750422
arc length = penis length = 8.0757174
You should make a photoshop filter for measureing tranny cocks :D
gege12
07-08-2008, 12:36 PM
i've seen the film when she measure her dick it's n8.5 and 21.5 cm
Skwisgarr Skwigelf
07-09-2008, 06:00 AM
I don't feel having the actual numbers actually changes anything with regards with to how huge it looks
Paladin
07-09-2008, 07:37 AM
I agree, the ruler, given the 3/8" she has pressed into her stomach, reads 8"
....but you must take into account the 17" radius of curvature of the penis in order to calculate its true, arc length.
The chord angle would be:
angle = 2*asin(opposite/hypotenuse)
angle = 2*asin((8/2)/17)
angle = 2*asin(0.235294)
angle = 27.21792 degrees or 0.4750422 radians
arc length = radius * angle
arc length = 17 * 0.4750422
arc length = penis length = 8.0757174
You should make a photoshop filter for measureing tranny cocks :D
The angle of the dangle equals the heat of the meat times the mass of the ass plus the square of the times the sum of the cum!
gummi baer
07-09-2008, 08:05 AM
2 fists and 1 mouthfull, I guess.
ptyseminole
07-09-2008, 09:51 PM
it's large, that's all you need to know....
gege12
07-11-2008, 07:58 PM
no it's exciting to know the measure and more exciting to see the measurement
Powered by vBulletin® Version 4.2.3 Copyright © 2025 vBulletin Solutions, Inc. All rights reserved.